Cleaning method of acrylic cosmetic display rack

by:SAFEKA      2019-07-02

Acrylic acid is what we often call plexiglass, with crystal transparency. Acrylic acid is also called plastic crystal, and its light transmittance is greater than 92%. And it has a high surface hardness and wear resistance and is now commonly used as a raw material for products with high appearance requirements.

Acrylic is most commonly used as a material for cosmetic counters, and most cosmetic displays are made of acrylic. The acrylic display stand looks high-end, and its texture is superior, which can make lipstick, powder, nail polish, etc. more dazzling but will not overshine the displayed goods. Therefore, it is always the best supporting role.

What advantages does it have compared to crystal? It is more beautiful than crystal, which is the idea that customers have when they see a display product made of acrylic.

Even natural diamonds need to be wiped regularly after prolonged use. As a product of industrial technology, acrylic can stay clean and beautiful for a long time without frequent maintenance.

How to keep the beauty of acrylic? What are the specific steps?

The steps of acrylic care are similar to the skincare steps of a girl.

1. Daily basic care

① The first step for skincare: Clean and wash off all the dirt on the face. While for the cleaning of the acrylic plate, just wipe it with soft cotton cloth with 1% soapy water on it. The three pieces of information conveyed in this sentence are as follows:

A. Do not use a strong acidic and alkaline organic solvent (such as alcohol and gasoline) solution to clean the acrylic plate.

B. Do not rub the acrylic board with a hard object or a dry cloth.

C. Do not use any detergent containing particulate matters.

②. Patterned acrylic products are not easy to wipe. It is recommended to use a toothbrush with detergent on it to remove the dirt in the pattern by rubbing.

2. Common problem solving

① Oil stain: Add water to soft water cleaner. It can be scrubbed with a soft cloth soaked with the cleaner for glass that is currently on the market. It can also be wiped with a towel soaked in water or warm vinegar.

② Ink stain: Rub with a cloth dampened with water and then wipe it with a damp cloth.

③ Paint: Scrub it with a cotton dipped in the hot vinegar. Wipe the acrylic product with a clean and dry cloth dampened with alcohol to make it crystal-clear.

④ Scratches: if it is a small scratch, you can wipe it directly with a piece of toilet paper or a rag with a little toothpaste on it. If it is a large area of scratches, it is recommended not to use sandpaper because it will scratch the entire surface.

3. If you are doing a good job with basic care, you need to think about how to make the acrylic product more beautiful. Obviously, we need comprehensive care for the display products.

Apply kerosene to the acrylic product or apply chalk ash and gypsum powder to the acrylic product to dry, then wipe with a clean cloth or cotton cloth to make the acrylic product clean and bright.

Step: Spray the cleaner onto the acrylic product, then apply a plastic wrap to the acrylic product to soften the cured grease. After ten minutes, tear the plastic wrap and wipe it with a damp cloth.

4.Special Note

In addition to the basic care, if these two small details are noticed in daily use, the life of the acrylic display stand will be greatly extended.

① Use

When heated to about 70 ° C to 85 ° C, acrylic acid will deform. When heated to more than 100 ° C, it will become soft. When using a cosmetic display stand, the parts of the power supply should be paid close attention to. Long-term use can cause the bulb to heat up and can cause extremely high local temperatures. Therefore, the habit of regular inspection needs to be developed.

② There is a gap left between the display frame.

Most of the time, cosmetic display racks should be properly arranged to achieve better product promotion effect. Acrylic sheets have a very large coefficient of thermal expansion, so expansion gaps caused by temperature changes should be considered. Especially in winter and summer, there is a large difference in temperature between day and night so that acrylic acid will have the effect of thermal expansion and cold contraction. A slight gap should be left when the acrylic display stand is placed, and the specific width of the gap is determined by the thickness of the acrylic sheet.

Safeka Display Co., Ltd. has become a leading brand and maintains a high market leadership position in the display market.

Safeka Display Co., Ltd. strongly recommends that you cooperate with us on the showcase project and we assure you that you will be very happy with the results. We will provide high-quality custom display boxes for optimal point-of-purchase display and ensure that they are set up by a professional installer.

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for contacting us. If for a timely reply now, you can contact following as well: Skype: ophelia.lee3 Wechat/whatsapp/phone: +86 15986640355