For example, a portable display wall can be used as a space partition for a small office or as a display board for a local library to showcase new books, evening events and speakers.If you buy a portable display wall in an office supplies store or a crafts store, it can be quite expensive.You can create your own noticeboard using the basic noticeboard and the bottom of the regular office chair.
If you can find old or broken office chairs with wheels intact, it could be a cheap item.Start with the old office chair.The seat part of the chair should be removed from the wheel, so you only have the wheels, the metal octopus frame and a connector screw left.The screw should be pointed up in the air.
Put the bulletin board flat.
Pick up the pencil and make two marks from 2 inch on each side at the bottom of the board.When the notice board is straight up, the Mark should be on the edge down.Drill two small holes with two marks as a guide.
The holes should be small and do not go through the wooden frame of the notice board.After the drilling is completed, the drilling residue is blown out of the hole.Slide the notice board to the table and place the side drill even on the edge of the table.
Insert some wood glue into a hole and fix the metal octopus frame in the hole with wheels.Insert the connector screw into the hole and keep the wheel structure stationary until the glue is dry.Repeat this step with other metal octopus structures.
Put the wheels on the ground, so the notice board is straight.Let the notice board stand by itself before the glue is completely dry.Once it's dry, you can push the notice board to the wheel as you like.