Grade 5 Bolt Specifications - tensile strength of cardboard-SAFEKA-img

Grade 5 Bolt Specifications - tensile strength of cardboard

by:SAFEKA      2019-07-25
Grade 5 Bolt Specifications  -  tensile strength of cardboard
The industry rated the bolts in many different ways.The rating of the Association of Automotive Engineers (SAE) is slightly different from that of ASTM International (originally referred to as the American Association for Testing and Materials.The International Standards Organization provides a separate rating system for bolts that are more stringent than ASTM and SAE.
There are many dimensions and strength of the bolts.The grade of the bolt depends on its strength.Grade 5 bolts usually connect the metal to the metal.
Proof that the load measures the direct load (applied tension) that the fastener must support without creating visible deformation.This measurement is in units of pounds/square inches (psi.The load resistance specification for grade 5 bolts is bolts 85,000-1/4 psito 1-inch long.
Bolts from 1 to 1 or more.
5 inch long must bear a proven load of 74,000 psi.ASTM requires the load resistance specification of Grade 5 bolts to be 55,000 psi for Bolts above grade 1.5 to 3 inches.The equivalent ISO Bolt is 8.8 for all bolt sizes, a load of 85,000 psi must be borne.
Yield strength measurement fasteners must be supported by a direct load (applied tension) with a specific visible deformation ).This measurement is also in pounds/square inches.Yield strength specification for first grade monthly bolts 92,000 psi bolts 1/4to 1-inch long.
Bolts from 1 to 1 or more.
5 inch long must withstand yield strength of 81,000 psi.ASTM requires that the yield strength of Grade 5 bolts be standardized to 58,000 psi of bolts above grade 1.5 to 3 inches.For all bolt sizes, the yield strength of the equivalent ISO Bolt must be 92,000 psi.
Tensile strength measures the resistance of the material to any force attempting to stretch, deform, or tear the material.Bolt 120,000-5 grade bolt tensile strength is 1/4 psito 1-inch long.Bolts from 1 to 1 or more.5 inch long must provide tensile strength of 105,000 psi.
ASTM tensile strength specification for grade 5 bolts is 90,000 psi for Bolts above grade 1.5 to 3 inches.For all vacuuming dimensions, the tensile strength of the equivalent ISO Bolt must be 120,000 psi.The rating of each bolt depends on the length of the bolt.
As mentioned earlier, the size of the bolt determines the requirements for proof of load, yield and tensile strength.Marking on the head of the Bolt helps to identify the bolt rating.Class 5 bolts are identified by three lines that radiate from three points at an equal distance around the perimeter of the head of the bolt to the center.
Grade 8 ISO equivalent.
8.
display the number 8.
8 or 88 nailed to the head of the bolt.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for contacting us. If for a timely reply now, you can contact following as well: Skype: ophelia.lee3 Wechat/whatsapp/phone: +86 15986640355